Production-grade SLS nylon and DMLS metal printing for clients who need parts that go into actual products, not just prototypes. ISO 9001:2015 certified, full material traceability, repeatable inspection, and capacity for batches from 1 to 10,000+ parts.
Request Production QuoteThe phrase "industrial 3D printing" gets used loosely. We mean printers and processes capable of producing end-use parts that meet engineering specifications repeatably. That requires temperature-controlled build chambers, calibrated lasers, certified powder lots, post-processing under controlled conditions, and a quality system documenting every step. It also requires materials with published mechanical properties, not hobby-grade filaments.
3D Printzkart's Bangalore facility runs EOS, HP MJF, and SLM Solutions class equipment for industrial work. We supply parts to aerospace tier-1 suppliers, medical device OEMs, automotive contract manufacturers, and DGCA-certified drone makers across India.
Best for plastic production parts at 1-5,000 unit volumes. PA12, PA11, glass-filled nylon, carbon-fiber nylon, and TPU. Build volumes up to 380 × 285 × 380 mm. Layer thickness 0.10-0.12 mm. Ideal for housings, ducts, brackets, and complex assemblies that would otherwise require multiple machined or molded parts.
Fully dense metal parts in stainless steel 316L, 17-4PH, aluminum AlSi10Mg, titanium Ti6Al4V, Inconel 718, and tool steel. Build volume 250 × 250 × 325 mm. Used for aerospace brackets, medical implants, conformal-cooled tooling inserts, hydraulic manifolds, and heat exchangers.
For volumes 100-10,000+ in PA12 and TPU. Faster cycle than SLS for medium-batch production with isotropic mechanical properties.
Industrial FDM up to 600 × 600 × 600 mm in PEEK, PEI/Ultem, polycarbonate, and carbon-PA. Used for aerospace tooling, jigs, fixtures, and large prototypes.
Aerospace, defense, medical devices, automotive, energy, oil & gas, electronics, and industrial robotics. See also our pages for robot parts and drone parts.
| Tier | Quantity | Lead Time | Documentation |
|---|---|---|---|
| Bridge Production | 1-50 | 5-10 days | Standard COC |
| Series Production | 50-500 | 10-21 days | COC + Dimensional Report |
| Volume Production | 500-10,000+ | 21-45 days | Full FAI + PPAP optional |
SLS PA12 and DMLS metal parts meet or exceed the mechanical properties of injection-molded or cast equivalents in many applications. We routinely supply end-use brackets, ducts, housings, and structural parts to OEMs.
Within a single build, parts hold ±0.2 mm on SLS and ±0.1 mm on DMLS. Batch-to-batch we use calibration test prints and powder lot tracking to maintain consistency.
We are ISO 9001:2015 certified. AS9100 and ISO 13485-aligned work is supported via documented controls. Contact us for documentation requirements specific to your industry.
SLS up to 380 × 285 × 380 mm, DMLS up to 250 × 250 × 325 mm, large-format FDM up to 600 × 600 × 600 mm. Larger parts are printed as bonded sections.
Yes. CNC finishing of critical features, vibratory tumbling, bead blasting, vapor smoothing, dyeing, painting, and electroplating are all available in-house or via qualified partners.
Send drawings or STL. Receive a quote with full documentation options.
Request Industrial Quote